Baldwin iCool Series OEM Thermoelectric Cooler
Accurate analysis of combustion samples and process control streams requires a method to remove the moisture from the sample without removing the gas components of interest. The new Integrator Series Thermo -Electric Cooler is an ideal way to decrease the moisture content of sample gases to a repeatable, stable dew point of 4°C (39°F). The Integrator Series line of coolers eliminate water interference during sensitive measurements and prevent water condensation in filters, pumps and sample lines. Most importantly, these coolers protect valuable analyzers from damage due to entrained water
droplets.
Features:
- 1-4 lpm (2.2 – 6.4 scfh); 58 Btu/Hr; based on 12% water at inlet
- Single or dual channel system
- (1) 5″ active impinger (select material below) plus 5″ optional passive impinger
- LCD display for temperature and setpoint
- LED displays for “ready” or “fail”
- 90-240 VAC, 50/60 Hz, auto-sensing
- 7.25″ x 8.25″ x 10.25″ (18.5 cm x 21 cm x 26.7 cm); 11 lbs
- Not suitable for high ambient temperature applications; Must be mounted in air conditioned enclosure
- Single or dual head peristaltic drain pump required but not included
iCool Series Cooler Specifications
Sample Gas Flow Range | 1-3 LPM (2.1- 6.4 SCFM) |
Inlet Condition at Rated Flow | 150°C (300°F) @ 12% H20, 2.5 LPM |
Outlet Dew Point at Rated Flow | 4°C (39.2°F) |
Maximum Inlet Temperature | 15 lbs – 6.8 kg |
Maximum Inlet Pressure | 200°C (392°F) SS, Durinert, Glass 138°C (280°F) Kynar |
Ambient Temperature Range | 45 psig – 3 bar / 2250 mmHg |
Power Supply | 33-104°F – 0.6-40°C |
Dimensions | 18.5 x 21 x 26.7 cm HWD 7.25 x 8.25 x 10.5 in. |
Weight | 5 kg (11 lbs) |
iCool Cooler Intelligent Product Numbering System
1 – AC Power |
|
AC Powered Auto Sensing 90-240 VAC | A |
2 – Impinger Count |
|
1 active impinger, 1-2 lpm based on 12% water at inlet | 1 |
1 active impinger, 1 passive impinger, 3-4 lpm on 12% water at inlet | 0 |
3 – Impinger Type |
|
5″ Stainless Steel, EZ Clean Twist-Apart Impinger | ES |
5″ Glass Impinger, threaded with fittings | G |
5″ Kynar Impinger | K |
5″ Stainless-Durinert coated, EZ Clean Twist-Apart Impinger | ED |
iCool Series Cooler Recommended Accessories
ITEM # | Description |
3KPB-001 | Peristaltic pump, single head, 115 VAC, complete with enclosure |
3KPB-002 | Peristaltic pump, single head, 230 VAC, complete with enclosure |
3KPB-003 | Peristaltic pump, dual head, 115 VAC, complete with enclosure |
3KPB-004 | Peristaltic pump, dual head, 230 VAC, complete with enclosure |
iCool Series Cooler Spare Parts
ITEM # | Description |
3KPB-000 | Pump Peristaltic, No Heads |
2PBM-001 | Peristaltic pump, motor only, 115 VAC 60 Hz |
2PBM-002 | Peristaltic pump, motor only, 230 VAC 50 Hz |
2PBM-003 | Peristaltic pump, head only, standard |
2PBT-002PK | Peristaltic pump, tubing, norprene, size 17 (10 feet) |
3CXD-023 | Impinger, 5″ EZ-Clean twist-apart, SS Durinert+ coated |
3CXD-025 | Impinger, 5″ NJ, EZ-Clean twist-apart, SS Durinert+ coated |
3CXG-001 | Impinger, 5″ glass, threaded with fittings |
3CXK-001 | Impinger, 5″ Kynar |
3CXS-023 | Impinger, 5″ SS, EZ-Clean twist-apart |
3CXS-025 | Impinger, 5″ NJ, EZ-Clean twist-apart, SS |
3CCB-050 | Control board, single channel |
102558 | Power supply; 100W, 12VDC |
1TTC-025 | Thermister probe |
2FAN-004 | Fan, muffin, 4″ x 1-1/2″, 12VDC |
3KPE-004 | Peltier element kit, 40 mm, single TE |
3KCW-007 | Water Slip Sensor,Assembly, Wire leads only |
4C-NJ/K | NJ Thermocouple Retrofit; for 1 Impinger |